Why do my business emails go to junk?

Because inboxes like Gmail and Outlook judge every email before deciding where it goes. They look at what it says, how the sender has behaved before, and whether it can prove where it came from. You can’t control all of that, but the proof is in your hands, and it’s the part many small businesses are missing. Until this month, we were missing part of it ourselves.

The proof comes from three settings published on your domain, the part of your email address after the @. Without them, an email from yourclinic.co.uk looks no different from a fake pretending to be you, so filters treat it more cautiously.

What are SPF, DKIM and DMARC?

They’re three short text records that sit in your domain’s settings, each doing a different job:

  • SPF (Sender Policy Framework) lists the services allowed to send email as your domain, such as Google Workspace or Microsoft 365. In the words of the UK’s National Cyber Security Centre (NCSC): “SPF allows you to publish IP addresses which should be trusted for your domain.”
  • DKIM (DomainKeys Identified Mail) adds a hidden digital signature to every email you send. The receiving inbox checks it against a key published on your domain, which proves the email came from you and wasn’t changed on the way.
  • DMARC (Domain-based Message Authentication, Reporting and Conformance) tells inboxes what to do with an email that claims to be from you but fails those checks: deliver it, send it to spam, or reject it. It can also send you daily reports of who is sending email as your domain.

All three are free, and they work the same way whichever email company you use.

Are SPF, DKIM and DMARC required now?

For anyone sending a lot of email, yes. Since 1 February 2024, Google has required everyone who sends to Gmail accounts to “Set up SPF or DKIM email authentication”. Anyone sending more than 5,000 messages a day must use SPF, DKIM and DMARC. Yahoo brought in the same rules that month. Microsoft followed for Outlook.com, Hotmail and Live addresses: after 5 May 2025, high-volume senders without all three see their messages routed to Junk.

Most small businesses send nowhere near 5,000 emails a day, so those hard rules don’t apply to them. The filters still notice, though. Google says email that doesn’t meet its guidelines “might be marked as spam”. And the NCSC’s advice for UK organisations is clear: “You should protect all of your organisation’s domains, including where your organisation uses common Cloud email providers.”

Why does it matter so much for a clinic?

Because so much of a clinic’s booking happens by email. Consultation replies, appointment confirmations, deposit receipts and aftercare instructions all go out by email. One in the junk folder can mean a missed appointment, or a client who thinks you never replied.

There’s a safety side too. Without DMARC, a scammer can send emails that look as if they come from your clinic’s address, and your clients have no easy way to tell. The NCSC says these settings help by “making it difficult for cyber criminals to spoof your email address.”

Doesn’t my email company set this up for me?

Partly, and you can’t assume it. SPF is usually added when email is first set up. DKIM is the one most often missing, and DMARC is usually left for you to add.

  • Google Workspace signs your email with your own domain only once an administrator turns DKIM on in the Admin console. Google says domains bought through Squarespace get a key automatically; others need it switched on.
  • Microsoft 365 automatically signs with the address it gives every new account, ending onmicrosoft.com. To sign with your own domain, you add two records and switch signing on.
  • Some companies that look after both your domain and your email publish DKIM for you. When we checked one domain set up that way, the records weren’t there, possibly removed during an earlier change. Check rather than trust.

How can I check my own email in two minutes?

  1. Send yourself a testFrom your business address, send a short email to a free Gmail account. If you don’t have one, a friend’s or colleague’s will do.
  2. Open Show originalOpen the email in Gmail on a computer. Next to the Reply button, click More (the three dots), then Show original.
  3. Read the three resultsNear the top you’ll see SPF, DKIM and DMARC, each with a result. You want all three to say PASS.
  4. Check whose name is on the signatureThe DKIM result should name your own domain. If it names your email company’s domain instead, such as one ending onmicrosoft.com, DKIM isn’t set up for your domain yet.

Online checking tools can help, but they sometimes disagree with each other. A real email’s Show original is the most reliable test, because it shows exactly what an inbox saw.

What did we find when we checked our own?

Half of it was missing. On 17 November 2026 we checked staieltd.co.uk, our own domain. SPF was set up correctly. DKIM wasn’t: our Google Workspace email had never been switched on to sign with our own domain. DMARC was there, but set to watch only, with nowhere to send its reports. So our emails said which services could send them, but didn’t prove they were really ours.

We fixed it on 19 November. We generated a DKIM key in the Google Admin console, added it to our domain’s settings and switched on authentication. Then we changed our DMARC record to send its reports to a new address on our own domain. The work took about 15 minutes, plus a short wait for the new record to appear. A test email to Gmail then showed SPF, DKIM and DMARC all passing.

We then checked the domains of the businesses we’ve built websites for. Of the ones that use their own domain for email, none had a DMARC record, we couldn’t find DKIM on any of them, and one had no SPF either. That’s why we now check all three for every client when their website goes live.

How do I fix SPF, DKIM and DMARC?

You make the changes in your domain’s DNS settings, usually at the company you bought the domain from, or whoever manages it for you. DKIM starts in your email company’s admin. Work through them in this order:

  1. Find out who runs whatYour email company provides your inbox: Google Workspace, Microsoft 365, or a mailbox from your domain company. Your DNS settings are usually with the company you bought the domain from. Take a screenshot of the DNS page before changing anything: it’s your way back.
  2. SPF: one record, listing every senderLook for a TXT record starting v=spf1. There must be only one: the SPF standard says a domain “MUST NOT have multiple records”, and two cause a failure. If it’s missing, add your email company’s value, for example v=spf1 include:_spf.google.com ~all for Google Workspace. If another service sends email as you, add it inside the same record.
  3. DKIM: switch it on, then publish the keyIn Google Workspace, open the Admin console and go to Apps, Google Workspace, Gmail, then Authenticate email. Generate a record, add it to your DNS as a TXT record, wait for it to appear, then click Start authentication. In Microsoft 365, the Defender portal shows two CNAME records to add before you switch signing on. Other email companies have their own page for it. Always use the values your own account gives you.
  4. DMARC: start by watchingAdd a TXT record with the host name _dmarc. Start with p=none, which changes nothing about delivery but sends you reports. Google recommends starting this way.
  5. Test againSend another test email to Gmail and check Show original. New records usually appear within an hour, though some take longer.

A DMARC record to start with looks like this. It’s an example for a made-up domain, yourclinic.co.uk: use your own domain, and make sure the reports address exists, for example as an extra address on an existing mailbox.

Type:  TXT
Host:  _dmarc
Value: v=DMARC1; p=none; rua=mailto:dmarc@yourclinic.co.uk

What do none, quarantine and reject mean in DMARC?

They’re the three things DMARC can tell an inbox to do with an email that fails the checks:

  • p=none: in Google’s words, “Take no action on the message and deliver it to the intended recipient.” You just get the reports.
  • p=quarantine: failing emails go to the spam folder.
  • p=reject: failing emails are refused altogether.

Google recommends starting with none and tightening the policy as you learn how your email is being authenticated. Our approach is about two weeks of reports first. Once they show only your own services sending as you, such as your email company and any newsletter or booking system, switch to quarantine. Never tighten it before DKIM passes, or your own emails could be the ones sent to spam.

What mistakes should I avoid?

  • Adding a second SPF record instead of editing the first. Two records make SPF fail completely.
  • Letting a website change wipe your email settings. When you point your domain at a new website, change only the website’s records. If your domain company offers to “connect automatically” or “reset to default settings”, say no: either can remove email records.
  • Copying DKIM values from a guide or another business. Each key belongs to one account.
  • Forgetting other services that send email as you, such as a newsletter, booking or invoicing system. Each needs its own DKIM, set up in that service, before you tighten DMARC.
  • Sending DMARC reports to a different domain. An address elsewhere, a Gmail address included, only receives them if that domain has agreed to, so use an address on your own domain.
  • Piling too many services into SPF. The standard allows 10 lookups; past that, SPF fails.

Will this stop my emails going to junk?

It makes it less likely, but it isn’t a guarantee. These settings prove an email came from you; they don’t make anyone want it. Filters also weigh what you write and how people respond to your emails.

A few habits help. Send first emails to new contacts one at a time rather than in a batch, and keep them short and personal. Leave attachments and shortened links out of a first message. Ask a question people will want to answer: replies help show your emails are wanted.

Frequently asked questions

Do I need this if I only send a few emails a day?

Yes. The strict rules are for big senders, but filters treat unauthenticated email from everyone more cautiously, and DMARC also makes it harder for anyone to send fake emails as you.

Could setting this up stop my emails working?

Not if you go in order. SPF and DKIM only add proof, and DMARC set to p=none changes nothing about delivery. The risk comes from deleting or duplicating records, so edit what’s there and take a screenshot first.

How long does it take?

About 15 minutes of work, then a short wait for the new records to appear, usually within an hour.

My domain and my email are with different companies. Does that matter?

No. DKIM starts at your email company, and the records go wherever your DNS settings are. Plenty of businesses have their domain at one company and their email at another.

Will this affect my website or my Google ranking?

No. These are email settings. They sit beside your website’s records on the same DNS page, but they don’t change how your website works or ranks.

Sources